The innovative Stratco Aqua-Mod Tank is unmatched in quality and value for money. Designed especially for homes, units and townhouses where space is limited, its clean, smooth lines will create a seamless blend with your home's architecture.
Available in un-painted galvanised or painted in your choice from a broad spectrum of colours, a Stratco Modular Tank is an ideal match to your outdoor environment.
Product Details
Technical Information
Accessories
Stands
Aqua-Mod™ Tank Accessories
Get the full potential out of your rainwater tank with a complete range of pumps and accessories from Stratco. A wide range of pumps are available. The pump you choose will depend on the tank size, the requirements of the appliance that will feed from the tank, the diameter of the plumbing pipes and the pressure required.
Optional extras include a different sized outlet and tap, a factory fitted flushing plug, and a tank stand tailored to your tank size. The stands are 500mm high, engineered for strength and made from galvanised steel. Optional adjustable feet kits are available with your stand to provide astable footing on uneven ground.
With four sizes to choose from, there is an Aqua-Mod Tank for every requirement. The range includes a 500 litre One Module, a 1000 litre TwoModule, an 870 litre Three Module, and a 2000 litre Four Module Tank
Taps
The One, Two and Four Module Tanks are supplied with a 3/4” outlet and tap, while the Three Module Tank has a 1/2” outlet and tap. All Aqua-Mods are supplied with an inbuilt filter, a 400mm x 400mm inspection point with acover, and all inlets and outlets are protected with mosquito proof wire.
Easy Maintenance
Below are a few simple tips to help you get the most out of your Stratco rainwater tank.
When installing your tank, ensure it is on a level, solid base.
Do not store the tank on its side.
Flush the tank before use, this is very important when connecting a pump.
Do not stand on the top of the tank as the lid is not designed to support weight.
When attaching the tap, use thread tape on the tap fitting and do not over tighten it.
While the inlet filter provided with your tank will stop sticks and leaf debris entering the tank, it is also important to ensure the runoff area to the tank is free of debris.
Clean the gutters every two months, or more regularly if trees overhang the roof.
Remove any sludge from inside the tank when necessary.
Do not scrub or scratch the interior surface of the tank because it has a protective coating covering the walls.
Stratco tanks are produced from the highest quality materials and will provide many years of service if the important recommendations set out in the Stratco ‘Selection, Use and Maintenance’ brochure are followed.
Use Stratco rainwater calculator to see how you can save up to 100,000 litres of water a year.
