Order Information
Note: Curving of CGI will produce a minimum straight section at the end of the curve of at least 60mm. Stratco takes no responsibility for deformation that may occur from smaller radii. Please contact Stratco for further curving specifications.
Supply of profile template. Template must be provided at time of ordering. No responsibility will be accepted for sheets curved from drawings.
a - Distance from fascia front to wall.
b - Distance from fascia height to wall attachment.
c - Required dip for concave or rise for convex.
d - Pitch angle from wall.
r - Radius required.• Number of sheets required.
• Direction of laying.
• Sheet lengths required.
• Type of material.
• Type of curve.
• If colour, is it required to
• If 50 mm gutter overhang is required topside or underside?
Bullnose Forming
Recommended minimum radius 450mm.
Maximum sheet length 6000mm.
Concave/Convex Forming
Recommended minimum radius 450mm.
Maximum sheet length 6000mm.
Barrel Vaulting
Recommended minimum radius 450mm.
Maximum sheet length 10,000mm.
