Maxiclad Fixing and Laying Directions - Non-Cyclonic Areas

Note: The following recommendations apply to non-cyclonic areas.

• Sheets should be laid into the prevailing weather as shown to reduce the possibility of penetration of wind driven rain.
• Pan fixing - one fixing required per pan. Fasten adjacent to overlapping rib.
• Crest fixing - one fixing required per crest.
• The below fastener sizes are suitable for fixing over an insulation blanket up to 55mm thick. For thicknesses up to 100mm, the next standard screw length to that indicated is to be used.

Maxiclad Fastener Selection
	Walling
	Crest Fixing	Pan Fixing
Fixing to Steel Self drilling and tapping screw with neoprene washer	12 x 35mm	10 x 16mm
Fixing to Timber Type 17 hex head screw with neoprene washer	12 x 50mm	10 x 25mm
Laying Procedure