Stratco C-Square Gutter - square gutter, Smoothline round and half round gutters, OG gutter, Quad gutters, eaves gutter

Stratco C-Square Gutter

The tick icon denotes where this item is available for purchase.

Brochures & Installation Guides
Brochure Download
Installation Guide Download
Steel Selection, Use and Maintenance Download

Designed specifically for verandahs, carports and industrial
applications, C or ‘Commercial’ Square Gutter is commonly used in commercial projects where a modern, attractive gutter is required.

Product Details

Technical Information

Accessories

C-Square Gutter Accessories

Manufactured Int. or Ext. Mitre	Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building.
Stop End	Individual stop ends can be supplied in left and right hand ready for on site installation.
GP Bracket	GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters.

Note: Component availability is State specific, please check prior to ordering.

TAB LINK

C-Square Gutter

Stratco's C-square Gutter is a square fronted gutter that will deliver a neat looking appearance to your roofing project.

Stratco's C-square Gutter has a unique fold at the back of the gutter which enables it to be easily secured to the standard 150 cpf (carport fascia truss) or roof sheeting.

Stratco's C-square Gutter is available in a Zinc/Alum, pre-painted colour steel and galvanized. At Stratco you will also find a range of gutter accessories to complete the job. Accessories include stop ends, mitres and concealed brackets.

TAB LINK

C-Square Gutter Technical Information

Dimensions

Profile	Dimensions (mm)
	A	76
	B	118
	C	130

Specifications

Tensile (MPa)	BMT (mm)	Type	Capacity (mm²)	Total Cross Sect. Area (mm²)
G550	0.42	Standard	7813
G550	0.42	Slotted	5974	7155

Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994

TAB LINK