Hi-Square Gutter has a 130mm high front that will provide a visual cover to the end of most roof sheets and roof tiles. Its square front design delivers a neat finish to any home or building. It is provided with a slotted face to reduce water overflow into the building.
Product Details
Technical Information
Accessories
Hi-Square Gutter Accessories
Manufactured Int. or Ext. Mitre
Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building.
Stop End
Individual stop ends can be supplied in left and right hand ready for on site installation.
Int. Str-8-line Strap
Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face of the gutter.
GP Bracket
GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters.
Note: Component availability is State specific, please check prior to ordering.
Stratco Hi-Square Gutter is a square fronted gutter that will deliver a neat looking appearance to your roofing project.
Stratco Hi-Square Gutter is available in slotted form. It has excellent water catching capabilities in areas of very high rainfall and includes slots in the gutter to allow water to overflow freely.
Stratco's Hi-Square Gutter is available in a Zinc/Alum, pre-painted colour steel and galvanized. At Stratco you will also find a range of gutter accessories to complete the job. Accessories include stop ends, mitres and concealed brackets.
Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994
