Stratco OG Gutter is a traditional colonial gutter. ‘OG’ stands for ‘Old Gothic’, its style makes it the ideal choice for use on both traditional and modern homes.
Product Details
Technical Information
Accessories
OG Gutter Accessories
90˚ Ext. and Int. Cast Angle
Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building.
90˚ and 135˚ 2-Pce Ext. and Int. Cast Angle
Two piece cast angles provide an easy and flexible solution to gutter mitres. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner.
Manufactured Int. or Ext. Mitre
Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building.
Stop Ends
Individual stop ends can be supplied in left and right hand ready for on site installation.
Manufactured Return Stop End
Manufactured Return stop ends are made in factory from a continuous length of gutter and supplied ready to install on site. The face of the gutter continues all the way around the corner to the stop end portion of the gutter.
Int. Str-8-line Strap
Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face of the gutter.
External Bracket
External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.
Timber Fix Clip
Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building.
150mm Spike Bracket
Spike brackets are used on the more traditional Queensland homes. The spikes are fixed into the timber fascia, positioned underneath the gutter with the front portion of the bracket wrapping around the face of the gutter.
Note: Component availability is State specific, please check prior to ordering.
OG Gutter is available in two sizes of 125mm, and 150mm, depending on your State. To see what sizes are available in your state please check the Specifications table under Technical Information.
* Available in SA,WA, NSW, VIC, AS, NZ ** Available in QLD only
Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994
