OG Big One™ Gutter Accessories
Manufactured Int. or Ext. Mitre
 | Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building. |
Stop End
 | Individual stop ends can be supplied in left and right hand ready for on site installation. |
Concealed Bracket
 | Fixed internally into the gutter bead providing a clean finish to the external face of the gutter. |
Note: Component availability is State specific, please check prior to ordering.
OG Big One™ Gutter
When it comes to industrial and commercial projects you're dealing with large roof areas. In our summer storms a big roof area means more water than a conventional eaves gutter can carry.
OG Big One gives you the flexibility to design your gutter to your rainwater capacity requirements with girths of up to 600mm. The slotted Old Gothic face adds character and style to your building line.
OG Big One is easily fixed to any conventional building material, and the concealed fixing brackets provide a smooth appearance.
It is available in a variety of finishes including zinc-aluminium, prepainted colour steel or galvanised. It comes with a full range of accessories including stop ends, mitres and concealed brackets.
OG Big One™ Gutter Technical Information
Dimensions
Profile | Dimensions (mm) |
 | Girth | 450 | 600 |
| A | 110 | 140 |
| B | 150 | 210 |
| C | 140 | 200 |
Specifications
Girth (mm) | Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Sect. Area (mm²) |
| 450 | G300 | 0.55 | Standard | 15888 | |
| Slotted | 9881 | 11551 |
| 600 | G300 | 0.55 | Standard | 27401 | |
| Slotted | 26345 | 28615 |
Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994
