VC Gutter Accessories
Manufactured Int. or Ext. Mitre
 | Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building. |
Stop End
 | Individual stop ends can be supplied in left and right hand ready for on site installation. |
Int. Str-8-line Strap
 | Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face of the gutter. |
GP Bracket
 | GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters. |
Concealed Bracket
 | Fixed internally into the gutter bead providing a clean finish to the external face of the gutter. |
Timber Fix Clip
 | Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building. |
Note: Component availability is State specific, please check prior to ordering.
VC Gutter
VC Gutter has a square front which is designed to hide the ends of roof sheets.
VC Gutter Technical Information
Dimensions
Profile | Dimensions (mm) |
 | A | 58 |
| B | 119 |
| C | 108 |
Specifications
Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Sect. Area (mm²) |
| G300 | 0.50 | Standard | 5712 | 5594 |
| Slotted | 4412 | 6893 |
Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994
