VFC Gutter Accessories
Manufactured Int. or Ext. Mitre
| Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building. |
Stop End
| Individual stop ends can be supplied in left and right hand ready for on site installation. |
Return Stop End
 | A stop end ready to be installed on site to suit the project needs. |
Int. Str-8-line Strap
| Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face of the gutter. |
GP Bracket
 | GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters. |
External Bracket
 | External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter. |
Note: Component availability is State specific, please check prior to ordering.
VFC Gutter
VFC gutter is a square fronted gutter.
The VFC gutter profile is available in slotted form. Slots allow for water to overflow the gutter freely in areas of high rainfall.
VFC Gutter Technical Information
Dimensions
Profile | Dimensions (mm) |
 | A | 67 |
| B | 119 |
| C | 130 |
Specifications
Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Sect. Area (mm²) |
| G300 | 0.50 | Standard | 6775 | 7957 |
| Slotted | 5475 | 6657 |
Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994
