VFM Gutter Accessories
Manufactured Int. or Ext. Mitre
| Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building. |
Stop End
| Individual stop ends can be supplied in left and right hand ready for on site installation. |
Int. Str-8-line Strap
| Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face of the gutter. |
GP Bracket
 | GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters. |
Note: Component availability is State specific, please check prior to ordering.
VFM Gutter
Stratco's VFM Gutter is available in Zinc/Alum, pre-painted colour steel and galvanized. At Stratco you will also find a range of gutter accessories to complete the job. Accessories include stop ends, mitres and concealed brackets.
VFM Gutter Technical Information
Dimensions
Profile | Dimensions (mm) |
 | A | 77 |
| B | 120 |
| C | 138 |
Specifications
| Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Sect. Area (mm²) |
| G550 | 0.55 | Standard | 7888 | |
| Slotted | 6711 | 7888 |
Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994
