Stratco 210 fascia is similar to the award winning Clickfast® fascia system. However it has been designed with an extended depth of 210mm to account for the increased rafter height used in cyclonic regions.
Unlike timber, you will not experience warping, bowing, knots or cracking with Stratco metal fascia. Instead you will receive a consistent, trouble free product, without the variability of price and quality often found with timber.
Stratco 210 flat fascia is completely compatible with normal building construction. It complements steel or tiled roofs and means that accurate cutting of rafter ends is no longer required.
The system uses side-fix fascia brackets which can be nailed into the side of the rafter, rather than the end. Nailing into the side grain of rafters is far stronger than nailing into the end grain which may open up, releasing the nail. The fascia then slides onto the side-fix rafter bracket, allowing for free horizontal movement and uniform expansion and contraction and minimising distortion.
A suspension clip allows you to select the amount of fall the gutter receives. This high strength spring-clip is notched to allow for the clip to attach to the suspension rib found on all Stratco gutters. Gutters can even be adjusted later to correct house settlement.
Stratco manufactures a wide range of gutters compatible with 210 flat fascia. Accessories including external and internal mitres, joining sleeves, and barge gutters are available to make installation quick and easy.
