Ordering Flashings Information
Flashing drawings
Standard Flashing Drawings
All standard flashing drawings are shown as non-tapered, however can be ordered as tapered flashings using the “Ordering Tapered Flashings” details outlined below. Letters describe the dimensions of each plane of the flashing, and numbers describe the angle. You will need to advise us of all dimensions, and identify any angle which is not 90 degrees.
Order Methods
Clock Method For Phone Orders
Commence at the centre of the clock. Draw a straight line from the centre to the number on the clock (1-12 ) at the required angle, representing the first line of your flashing drawing. Where the pen stops becomes the centre of the clock for the next line. Complete the flashing using this method. For tapered flashings quote near edges first. Repeat for back (use same letters) unless otherwise indicated.
Page Method
The page method describes the flashing as it is drawn on a page. Commence drawing the flashing at the centre of the page describing the direction of the line as you draw it, advising if the line moves vertically up or down the page, horizontally left or right, or to which corner of the page. Also advise the length of the line. Do this for every line in the flashing, advising of any included angles.
Curved Flashings Technical Information
Curved Flashings specifications
The table below shows the standard material specifications for curved flashings.
| Standard Curved Flashings Specifications |
| Material | Base Metal Thickness (mm) | Max Width (mm) | Max Length (mm) | Max Radius (mm) |
| Galvanised, Zincalume, Colorbond , Ultra | 0.55 | 500 | 6000 | 450 |
As well as the standard materials specified above, Stratco may able to customize curved flashings to suit your material specifications. These custom flashings can be manufactured in a wide range of materials, lengths and thicknesses.
Contact your local Stratco for more details on custom curved flashings specifications.
Custom Curved Flashings Types
Quick links:
Custom Curved Flashings Types and Order Information (refer diagrams)
1. Nominate Face (a), Tail (b) and break (x) dimensions. (Note: Maximum break (x) = 10mm)
2. Nominate Flashing Type & Radius (r)
Type 1 - Curved Apron Flashings - External
Type 2 - Curved Apron Flashings - Internal
Type 3 - Curved Apron Flashings - Arch
Type 4 - Curved Apron Flashings - Reverse Arch
| Convex Curved Barge Flashings (With Straight) | Back to top |
1. Nominate Face (a), Tail (b) and break (x) & (y) dimensions. (Note: Maximum break (x) & (y) = 10mm)
2. Nominate Straight Length
3. Nominate Flashing Type & Radius (r)
Type 5 - Convex Barge Flashing - Left Hand
Type 6 - Convex Barge Flashing - Right Hand
| Concave Curved Barge Flashings (With Straight) | Back to top |
1. Nominate Face (a), Tail (b) and break (x) & (y) dimensions. (Note: Maximum break (x) & (y) = 10mm)
2. Nominate Straight Length
3. Nominate Flashing Type & Radius (r)
Type 7 - Concave Barge Flashing - Left Hand
Type 8 - Concave Barge Flashing - Right Hand
1. Nominate Face (a), Tail (b) and break (x) & (y) dimensions. (Note: Maximum break (x) & (y) = 10mm)
2. Nominate Flashing Type & Radius (r)
Type 9 - Convex Barge Flashing - Arch
Type 10 - Concave Barge Flashing - Reverse Arch
1. Nominate Sides (a) & (c), Head (b) and break (x) & (y) dimensions. (Note: Maximum break (x) & (y) = 10mm)
2. Nominate Flashing Type & Radius (r)
Type 11 - Curved Parapet Flashing
Type 12 - Curved Parapet Flashing - Arch & Reverse Arch
| Curved Barrel Vault Barge Flashings (Full Curve) | Back to top |
1. Nominate Face (a), Tail (b) and break (x) & (y) dimensions. (Note: Maximum break (x) & (y) = 10mm)
2. Nominate Flashing Type & Radius (r)
Type 13 - Barrel Vault Barge Flashing - Arch
1. Nominate Sides (a) & (c) and base (b) dimensions.
2. Nominate Flashing Type & Radius (r)
Type 14 - Curved Box Gutter Flashing
1. Nominate Face (a), Tail (b) and break (x) & (y) dimensions. (Note: Maximum break (x) & (y) = 10mm)
2. Nominate Flashing Type & Radius (r)
Type 15 - Curved Corner Flashing - External
Type 16 - Curved Corner Flashing - Internal
Contact Stratco for prices and ordering procedures on OG Curve Flashings.
