When attached to fascia, Smoothline gutter has the same appearance as Half Round gutter. However unlike Half Round gutter, Smoothline has a flat back.
Product Details
Technical Information
Accessories
Smoothline® Gutter Accessories
90˚ External and Internal Cast Angle
Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building.
Manufactured Int. or Ext. Mitre
Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building.
Stop End
Individual stop ends can be supplied in left and right hand ready for on site installation.
Return Stop End
A stop end ready to be installed on site to suit the project needs.
Int. Str-8-line Strap
Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face of the gutter.
Timber Fix Clip
Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building.
Note: Component availability is State specific, please check prior to ordering.
Smoothline Gutter is easier to fix, and less expensive than traditional Half Round gutter because it uses internal brackets. Painting and maintenance are easier too.
Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994
