Two styles of ridge capping are offered in 0.40mm and 0.55mm base metal thicknesses. Roll type ridge is a traditional style of ridge cap commonly found on corrugated steel roofs. In some States, a stiffening rib is formed into the skirt of the ridge to add strength and assist with placing the screws. Alternatively, a simple 3 Bend Ridge Cap can be pressed to your exact requirements.
Dimensions
| Availability | ||||||
| Type | Qld | NSW | VIC | SA | WA | NT |
| Roll Type 355 |  |
* |
* |
|||
| Roll Type 405 | |
* |
||||
| 3 Bend Ridge 400 | |
|
||||
| 3 Bend Standard Ridge | |
|
|
|
|
|
* Maximum recommended length 6000mm. |
||||||
Note: SA - Nominate when ordering if a Scribing Break of 32mm is required. WA - Supplied with 10mm breaks, 30mm breaks must be specified. |
||||||