Maxiclad® Technical Information

Profile

Material Specifications

Specifications
Material Properties	0.35mm BMT		0.42mm BMT
Material Properties	Zinc/alum	Colour	Zinc/alum	Colour
Total Coated Thickness (mm)	0.40	0.43	0.47	0.50
Mass (kg/linear metre)	2.74	2.79	3.26	3.32
Mass (kg/square metre)	3.36	3.43	4.00	4.07
Yield (square metre tonne)	297.2	291.2	250.1	245.8
Tensile Strength (MPa)	G550	G550	G550	G550

Spans

Walling Applications

			Wind Category 3			Wind Category 2
Building Height	Location	Wind Speed m/s	Internal Span	End Span	Overhang	Internal Span	End Span	Overhang
0 to 3 metres	Canberra	38	1950	1810	410	1410	1310	290
	Melbourne	39	1950	1810	410	1410	1310	290
	Perth	40	1950	1810	410	1410	1310	290
	Hobart	41	1860	1720	370	1340	1240	260
	Adelaide	42	1860	1720	370	1340	1240	260
	Sydney	45	1740	1610	360	1260	1170	260
	Brisbane	50	1570	1460	330	1130	1050	230

			Wind Category 3			Wind Category 2
Building Height	Location	Wind Speed m/s	Internal Span	End Span	Overhang	Internal Span	End Span	Overhang
3 to 5 metres	Canberra	38	1950	1810	410	1370	1270	280
	Melbourne	39	1950	1810	410	1370	1270	280
	Perth	40	1950	1810	410	1370	1270	280
	Hobart	41	1860	1720	370	1300	1200	260
	Adelaide	42	1860	1720	370	1300	1200	260
	Sydney	45	1740	1610	360	1210	1120	250
	Brisbane	50	1570	1460	330	1090	1010	220

			Wind Category 3			Wind Category 2
Building Height	Location	Wind Speed m/s	Internal Span	End Span	Overhang	Internal Span	End Span	Overhang
5 to 10 metres	Canberra	38	1820	1690	380	1270	1180	260
	Melbourne	39	1820	1690	380	1270	1180	260
	Perth	40	1820	1690	380	1270	1180	260
	Hobart	41	1740	1610	340	1210	1120	240
	Adelaide	42	1740	1610	340	1210	1120	240
	Sydney	45	1620	1500	340	1130	1050	230
	Brisbane	50	1450	1340	300	1010	940	210

Note: Spans are based on 0.4mm material, for other materials please contact your nearest Stratco sales office for spanning abilities.

The span tables shown above have been based on the following conditions:

Non Cyclonic areas
Terrain category two and three
Buildings up to ten metres high and up to thirty metre spans
Maximum internal pressure coefficient +0.2

For applications where conditions 1 to 4 do not apply, please contact your nearest Stratco sales office for further assistance