Stratco Roof and Ceiling battens - batten spacings, maximum roof batten and ceiling batten spans, material specifications

Roof and Ceiling Battens Technical Information

Roof Batten

Material Specifications
Profile	Material Properties	0.55mm BMT	0.75mm BMT
	Yield Strength	550MPa	550MPa
	Coating Mass	150g/m²	150g/m²
	Maximum Span*	1500mm	1200mm
	Max. Sheet Roof Spacing	1200mm	900mm
	Max. Tile Roof Spacing	330mm	-
	Batten Mass	0.71kg/m	0.97kg/m
* Maximum span continuous over at least two spans.

Note: Batten spacing must not exceed the maximum recommended roof cladding spans. Refer to the appropriate Stratco clading brochure for fastener and spanning details

Ceiling Batten

Material Specifications
Profile	Material Properties
	Base Metal Thickness	0.42mm
	Yield Strength	550MPa
	Coating Mass	150g/m²
	Batten Mass	0.35kg/m
	Max. Span*	1200mm (1500**)
	Max. Spacing	600mm
* Maximum span continuous over at least two spans. ** 1500mm maximum batten span is for WA only.

Note: The maximum span and spacings shown allow for a plasterboard thickness of up to 13mm. Refer to the appropriate manufacturer's specifications for details on the ceiling installation.