VFC Gutter
Stratco
SKU: VFC-Gutter
VFC Gutter has a clean, modern appearance that suits contemporary styles. The square front is designed to hide the end of roofing and provide a neat face to architecture. VFC Guttering is available with water overflow slots.Image gallery
Clean and Modern Square Front Gutter
Hide the edge of roofing with a gutter that has crisp, clean lines.
Attractive square front guttering that has been designed to conceal the edge of roof sheets and tiles with a smooth clean gutter face. The front face of the gutter is available with slots to allow excess water to overflow in high rainfall areas.
VFC Gutter is complimented by a large range of accessories including stop ends, gutter mitres and brackets. Choose from an extensive range of pre-painted colours or from un-painted zinc/al.
Brochures & Installation Guides
Gutter Accessories
Internal and External Mitres
Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.
Stop End
Individual stop ends can be supplied in left and right hand ready for on site installation.
Return Stop End
Return stop end ready to be installed on site to suit the projects requirements.
Internal Str-8-line Strap
Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face.
GP Bracket
GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters.
External Bracket
External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.
Note: Availability is state specific, please check prior to ordering.
Specifications
| Specifications | ||||
| Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Section Area (mm²) |
|---|---|---|---|---|
| G300 | 0.50 | Standard | 6775 | 7957 |
| Slotted | 5475 | 6657 | ||
Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.
Dimensions
|
Dimensions (mm)
|
|
| A | 67 |
|---|---|
| B | 119 |
| C | 130 |
