has been added to your cart
View Cart

Half Round Gutter

SKU: HRGAZ

$9.46 LM

Installation options available^

About this product

The appealing shape of Half Round Gutter is largely self cleaning. It has a good water carrying ability due to its wide 150mm diameter. Half Round is ideal for modern homes and is also popular on commercial buildings because of its practical shape.

For trade and project quantity discounts:

Stylish and Practical Guttering

Traditional curved forms of Stratco Half Round Gutter

Stratco Half Round Gutter is the perfect compliment to Spanish, and Tuscan styled homes. However, it has been used to great effect on both modern and traditional architecture.

Its smooth, self-cleaning shape also lends its use to commercial and industrial buildings due to its practicality.

Available Colours

Gutter Accessories

Gutters-Guttering-Gutter-Half-Round-Accessory-Angle-90.jpg

90° External and Internal Cast Angle

Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building.

Gutters-Guttering-Gutter-Half-Round-Accessory-Angle-90-Two.jpg

90° Two Piece Cast Angles

Available in NSW only, pre-made two piece cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean look around the corners of the building.

Gutters-Guttering-Gutter-Half-Round-Accessory-Angle-135-Two.jpg

 135° Two Piece Cast Angles

Pre-made two piece cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean look around the corners of the building.

Gutters-Guttering-Gutter-Half-Round-Accessory-Mitres.jpg

Internal and External Mitres

Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.

Gutters-Guttering-Gutter-Half-Round-Accessory-Return-Stop-End.jpg

Return Stop End

Return stop ends are ready to be installed on site to suit project requirements.

Gutters-Guttering-Gutter-Half-Round-Accessory-Stop-End.jpg

Stop End

Individual stop ends can be supplied in left and right hand ready for on site installation.

Gutters-Guttering-Gutter-Half-Round-Accessory-Bracket-External.jpg

Cast External Bracket

External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.

Note: Availability is state specific, please check prior to ordering.

Specifications

Specifications
Tensile (MPa) BMT (mm) Type Capacity (mm²) Total Cross Section
Area (mm²)
G550 0.42 Standard 7703 9176
Slotted 7126 8597

Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.


Dimensions

Gutters Guttering Gutter Half Round Profile

Gutters-Guttering-Gutter-Half-Round-Profile-2.png
Dimensions (mm)
A 78
B 148
C 104

Roofing_Gutters_Half_Round_Gutter_Locations-01.png

0 days
00 hours
00 minutes
00 seconds

Change Location

Please enter a valid postcode