HK Gutter
Stratco
SKU: HK-Gutter
HK Gutter or Household K presents a neat, smooth, modern appearance. Lengths are cut to your requirements, in a choice of zinc/al, galvanised, or pre-coloured steel. HK Gutter is available with slots to minimise overflow during downpours.Guttering With a Attractive Angled Form
The angled profile of Stratco HK Gutter provides a neat, attractive finish.
Stratco HK Gutter is suited to range of applications including use on residential properties and patios. The square, angled profile provides a modern take on a traditional form that blends expertly with contemporary architecture.
HK Gutter is available in a range of attractive pre-painted steel colours or in un-painted zinc/al. Stratco stocks a complete range of gutter accessories to finish your project including stop ends, mitres and concealed brackets.
Available Colours:
Brochures & Installation Guides
Gutter Accessories
Internal and External Mitres
Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.
Stop End
Individual stop ends can be supplied in left and right hand ready for on site installation.
Metal Fix Bracket
Metal fix brackets hold the face of the gutter into position. They are not visible on the gutter face.
Timber Fix Clip
Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building.
Note: Availability is state specific, please check prior to ordering.
Specifications
| Specifications | ||||
| Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Section Area (mm²) |
|---|---|---|---|---|
| G550 | 0.35 | Standard | 5394 | 6590 |
| Slotted | 3717 | 4816 | ||
Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.
Dimensions
|
Dimensions (mm)
|
|
| A | 65 |
|---|---|
| B | 133 |
| C | 84 |
