has been added to your cart
View Cart

OG Gutter 125 Ribbed

SKU: OGR125AZ

$6.74 LM
Temporarily out of stock

Installation options available^

About this product

OG Gutter has a traditional, charismatic profile. OG stands for 'Old Gothic'. The style of OG Gutter makes it the ideal choice for use on both traditional and modern homes. It is available with slots and in a huge range of colours.

For trade and project quantity discounts:

Traditional Elegance

Guttering that exudes traditional charm and character.

Featuring elegant, ornate, flowing lines that exude traditional charisma. Stratco OG or ‘Old Gothic’ gutter imparts a classic style to both modern and period homes.

Available with slots in the front to allow water to overflow, Stratco OG Gutter can be ordered in un-painted zinc/al or in a huge range of pre-painted steel colours. Finish your project with a comprehensive range of OG Gutter accessories including mitres, stop ends and brackets.

Available Colours

Gutter Accessories

Gutters-Guttering-Gutter-OG-Accessory-Angle-90.jpg

90° External and Internal Cast Angle

Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building.

Gutters-Guttering-Gutter-OG-Accessory-Angle-90-Two.jpg

90° Two Piece Cast Angle

Two piece cast angles provide an easy and flexible solution to gutter mitres. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner.

Gutters-Guttering-Gutter-OG-Accessory-Angle-135.jpg

135° Internal and External Cast Angle

Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building. (Not available in QLD).

Gutters-Guttering-Gutter-OG-Accessory-Angle-135-Two.jpg

135° Two Piece Cast Angle

Two piece cast angles provide an easy and flexible solution to gutter mitres. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner. (Not available in QLD).

Gutters-Guttering-Gutter-OG-Accessory-Mitres.jpg

Internal and External Mitres

Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.

Gutters-Guttering-Gutter-OG-Accessory-Return-Stop-End.jpg

Return Stop End

Manufactured Return stop ends are made from a continuous length of gutter and supplied ready to install on site. The face of the gutter continues around the corner to the stop end portion of the gutter.

Gutters-Guttering-Gutter-OG-Accessory-Stop-End.jpg

Stop End

Individual stop ends can be supplied in left and right hand ready for on site installation.

Gutters-Guttering-Gutter-OG-Accessory-Bracket-External.jpg

External Bracket

External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.

Gutters-Guttering-Gutter-OG-Accessory-Bracket-Spike.jpg

150mm Spike Bracket

Spike brackets are used on the more traditional Queensland homes. The spikes are fixed into the timber fascia, positioned underneath the gutter with the front portion of the bracket wrapping around the face of the gutter.

Gutters-Guttering-Gutter-OG-Accessory-Bracket-Strap.jpg

Internal Str-8-line Strap

Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external gutter face.

Gutters-Guttering-Gutter-OG-Accessory-Bracket-Timber-Clip.jpg

Timber Fix Clip

Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building.

Note: Availability is state specific, please check prior to ordering.

Specifications

  Specifications
Size (mm) Tensile (MPa) BMT (mm) Type Capacity (mm²) Total Cross Section
Area (mm²)
125 G550 0.42 Standard 4432 5609
Slotted 3374 4432
125 Ribbed G550 0.42 Standard 5500 6730
Slotted 4654 5506
150 G550 0.42 Slotted 5763 7055

Note: Calculation of the effective cross sectional area ‘Capacity’ for each nominal gutter is based on the requirements of section 3.8 AS/NZS 2179.1:1994.


Dimensions

Gutters Guttering Gutter OG Profile

Gutters-Guttering-Gutter-OG-Profile-2.png
Size (mm) A B C
125* 56 125 97
125 Ribbed^ 62 124 90
150 68 130 100

 

Roofing_Gutters_OG_Gutter_Locations-01.png

* Available in NSW ACT
^ Available in SA WA VIC AS
† Available in QLD

Become a Super Saver

Change Location

Please enter a valid postcode