VT Gutter
Stratco
SKU: VT-Gutter
Designed to hide the end of roofing, VT Gutter has a smooth, attractive face with simple lines that will suit a wide range of architectural styles. VT Guttering is available with slots to allow excess water to overflow in heavy downpours.Image gallery
Clean and Simple Lines
Square front gutter with a smooth attractive face.
VT or ‘Very Territorian’ gutter is designed to cover the edge of roofing with its smooth attractive face that features clean and simple lines. Slots are available in the front of the gutter to allow excess water to overflow freely.
Choose from un-painted zinc/al or from a huge range or pre-painted colours. Add the finishing touch with accessories including VT Gutter mitres, stop ends and brackets.
Available Colours:
Brochures & Installation Guides
Gutter Accessories
Internal and External Mitres
Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.
Stop End
Individual stop ends can be supplied in left and right hand ready for on site installation.
GP Bracket
GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters.
Note: Availability is state specific, please check prior to ordering.
Specifications
Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.
Dimensions
|
Dimensions (mm)
|
|
| A | 73 |
|---|---|
| B | 125 |
| C | 120 |
