Deckfast® Fascia Tool

About this product

The precisely engineered Deckfast® Fascia System includes the Fascia Tool and specially designed, colour coated, Fascia Screws available in Headcote® stainless steel or epoxy coated carbon steel. The Fascia System is designed to accommodate the large amount of expansion and contraction that can occur with many composite and PVC deck fascia boards. The pre-drilling tool creates an over-sized hole for the Fascia Screw, so that the fascia board hangs from the screw and can expand and contract without putting a large amount of force on the fastener. The Fascia System has been evaluated and approved for use by major decking manufacturers, including Trex® and DuraLife?. See decking manufacturer's installation guides for changes to application instructions - with the improved performance of the Fascia System (compared to standard deck screws used to install fascia), fewer fasteners may be required.

• Free spinning stop collar with O-ring The stop collar spins free of the drill bit, prevent marring or burnishing of the fascia board surface
• Anti-clog debris cavity gathers waste material, keeping it clear of the countersink
• Pre-set countersink the Fascia Tool matches the head diameter and countersink depth of the Fascia Screw for the perfect hole and fit
• Pre-set shaft length together with the countersink, the overall hole depth is designed for use with fascia boards from 1/2" to 3/4" thick