has been added to your cart
View Cart

VFM Gutter



per linear meter

Free Project Quote

Delivery currently unavailable to Pialba
Available elsewhere in QLD. Contact us for delivery options on 1300 165 165.
Click & Collect
Is available at Hervey Bay.
Also available at Capalaba, Sunshine Coast, Gold Coast, Toowoomba, Caboolture, Ormeau, Brendale.
Allow 8 days for collection..

Installation options available^

Scroll Down For DIY Instructions

About this product

VFM Gutter has a 138mm square front that is ideal for covering the end of roofing. It has a clean profile and a suspension rib in the back face for strength. VFM Gutter has excellent water carrying abilities and slots for excess water overflow.

For trade and project quantity discounts:

Strong, High Front Guttering

Conceal the edge of roofing with resilient VFM Guttering.

Ideal for commercial and industrial applications due to its strong, rigid profile and generous water carrying capacity. VFM Gutter expertly hides the edge of roofing due to its high front face. With a pronounced rib in both the front and back face of the gutter, VFM Gutter will remain straight over long lengths.

VFM Gutter is available with slots in the front to allow excess water to overflow in high rainfall areas. Choose from un-painted zinc/al or from a large range of pre-painted colours. Complete your project with a range of accessories including gutter brackets, mitres and stop ends.

Available Colours

Gutter Accessories


Internal and External Mitres

Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.


Stop End

Individual stop ends can be supplied in left and right hand ready for on site installation.


Internal Str-8-line Strap

Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face.


GP Bracket

GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters.

Note: Availability is state specific, please check prior to ordering.


Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.



Gutters Guttering Gutter VFM Profile

Dimensions (mm)
A 77
B 120
C 138



Change Location

Please enter a valid postcode