has been added to your cart
View Cart

VFC Gutter



Unavailable in your state.

Free Project Quote

About this product

VFC Gutter has a clean, modern appearance that suits contemporary styles. The square front is designed to hide the end of roofing and provide a neat face to architecture. VFC Guttering is available with water overflow slots.

For trade and project quantity discounts:

Clean and Modern Square Front Gutter

Hide the edge of roofing with a gutter that has crisp, clean lines.

Attractive square front guttering that has been designed to conceal the edge of roof sheets and tiles with a smooth clean gutter face. The front face of the gutter is available with slots to allow excess water to overflow in high rainfall areas.

VFC Gutter is complimented by a large range of accessories including stop ends, gutter mitres and brackets. Choose from an extensive range of pre-painted colours or from un-painted zinc/al.

Available Colours

Gutter Accessories

Gutters Guttering Gutter VFC Accessory Mitres

Internal and External Mitres

Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.

Gutters Guttering Gutter VFC Accessory Stop End

Stop End

Individual stop ends can be supplied in left and right hand ready for on site installation.

Gutters Guttering Gutter VFC Accessory Return Stop End

Return Stop End

Return stop end ready to be installed on site to suit the projects requirements.

Gutters Guttering Gutter VFC Accessory Bracket Strap

 Internal Str-8-line Strap

Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face.

Gutters Guttering Gutter VFC Accessory Bracket GP

GP Bracket

GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters.

Gutters Guttering Gutter VFC Accessory Bracket External

External Bracket

External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.

Note: Availability is state specific, please check prior to ordering.


Tensile (MPa) BMT (mm) Type Capacity (mm²) Total Cross Section
Area (mm²)
G300 0.50 Standard 6775 7957
Slotted 5475 6657

Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.


Gutters Guttering Gutter VFC Profile

Gutters Guttering Gutter VFC Profile 2
Dimensions (mm)
A 67
B 119
C 130



Change Location

Please enter a valid postcode