Outback® Gable

Overview

Show state availabilityStates Sold
  • ACT
  • NSW
  • NT
  • QLD
  • SA
  • VIC
  • WA

Exhibiting a strong presence and style, the pitched roof of an Outback Gable Verandah, Patio or Carport is endowed with an open feel that will enrich your home and outdoor entertainment area.

We can arrange installation

SAVE 50% OFF UPGRADE TO THE NEW SYLVANITE FRAME COLOUR

LIMITED TIME ONLY! Patio must be paid for before the 28/9/17 to be eligible for the discount to apply.

NEW! Outback Evolution

Outback Evolution offers a stunning range of NEW features:

 

Gable Outback Patio

Ever popular pitched roof charm of an Outback Gable Patio

Exhibiting a strong presence and style, the pitched roof of an Outback Gable Verandah, Patio or Carport is endowed with an open feel that will enrich your home and outdoor entertainment area.

The Outback Gable is available as a freestanding unit or attached to the home. When you combine it with flat roof or pergola sections then the prominent pitched roof becomes the attractive central hub of your outdoor lifestyle.

Available in Multispan or Clearspan designs to suit your design choices. You can also enjoy natural filtered light by incorporating Outback Rooflites in the Outback Deck.

It is hard to imagine a more charismatic and welcoming outdoor space.

Clearspan For Smooth Beauty

The Outback Clearspan Gable uses the Stratco exclusive Outback Deck, a remarkably strong roofing material that does not need additional support. The Clearspan Gable can span an impressive 7.5 metres wide. So you will really enjoy your outdoor lifestyle and big family occasions under this magnificent uncluttered gable.

Stratco Outback Gable Verandah, Patio

Multispan For Colour and Light Flexibility

An Outback Multispan Gable features purlins that are placed over the rafters in the roof. This supports the cladding, which can be the smooth Outback Deck, light and airy polycarbonate, or classic corrugated steel. The gable roof can span up to 6.6 metres wide on a Multispan design giving you a family-friendly hub.

Contact your nearest Stratco Home Improvement Store or Authorised Outback Dealer and let us show you the difference a Stratco Outback living solution can make to your home and lifestyle!

Stratco Multispan Outback Gable veranda, carport or patio

Technical DetailsClick to ExpandClick to Contract

Maximum Spans

Outback Multispan Gable - Maximum Opening (O) in mm
Wind Speed Attached to the wall or fascia on one side only Attached on one side and to the wall or fascia on one end using 120 or 150 Stratco Outback valley beams. Attached to a flat unit on one side and a wall or fascia on the opposite side. Or attached both sides and to the wall or fascia one end using 120 or 150 valley beams.
120 or 150 Valley Beams Type
1A or 2A
Type
3A
Type
4A
Type
1A
Type
2A
Type
3A
Type
4A
N1 (W28) 6600* 6600 6600 6600 6600 6600 6600 6600
N2 (W33) 6600* 6600 6600 6600 6600 6600 6600 6600
W36N 6300* 6300 6000 6000 6600 6600 6600 6600
N3 (W41) 5700* 5700 3000 4800 6600 6600 3000 6600
C1 (W41) 5400* 5700 3000 4800 5700 5700 3000 5700
N4 (W50) 4200* 3000 - 3300 3000 4800 - 4800
C2 (W50) 4200* 3000 - 3300 3000 3900 - 3900
W55C 3600* 2400 - 2400 - 3000 - 3000
C3 (W60) 3000* 2100† - 2100 - 3000 - 3000

* Minimum of four columns along the length of the gable unit on the opposite side of the attachment when solid infill is used.
† Height limited to 2400mm for flat unit type 1A.

Outback Clearspan Gable - Maximum Opening (O) in mm
Wind Speed Attached to the wall or fascia on one side only Attached on one side and to the wall or fascia on one end using 120 or 150 Stratco Outback valley beams. Attached to a flat unit on one side and a wall or fascia on the opposite side. Or attached both sides and to the wall or fascia one end. Using 120 or 150 valley beams.
120 or 150 Valley Beams Type
1A or 2A
Type
3A
Type
4A
Type
1A
Type
2A
Type
3A
Type
4A
N1 (W28) 6600* 6600 6600 6600 7500 7500 7500 7500
N2 (W33) 6600* 6600 6600 6600 7500 7500 7500 7500
W36N 6300* 6300 6300 6300 7500 7500 7500 7500
N3 (W41) 5700* 5700 3600 5100 7500 7500 6300 7500
C1 (W41) 5400* 5700 2700 4800 5700 5700 2700 4800
N4 (W50) 4200* 4500 2700 4500 4800 4800 2700 4800
C2 (W50) 4200* 4500 2700 4500 4800 4800 2700 4800
W55C 3600* 3900 2100 3900 4200 4500 2100 4500
C3 (W60) 3000* 2700† - 2700 2700† 3600 - 3300

* Minimum of four columns along the length of the gable unit on the opposite side of the attachment when a solid infill is used.
† Height limited to 2400mm.
N = Non-cyclonic wind classification.
C = Cyclonic wind classification.

 

Connection Details

Clearspan Gable

Connection details of the Stratco Outback Gable Veranda Clearspan

Multispan Gable

Connection details of the Stratco Outback Gable Veranda Multispan

Components

  • Ridge Cap
  • Outback Deck
  • Ridge Beam
  • Ridge Knuckle
  • Gable Rafter
  • Valley Beam
  • Angled Back Channel
  • Beam Capping
  • Gable Beam Bracket
  • Header Beam
  • Barge Cap
  • Post Bracket
  • Post
  • Front Fascia Beam
  • Gutter
  • Header Beam Bracket
  • End Strut
  • End Strut Plate
  • Multispan Gable Roofing
  • Purlin
  • End Rafter Bracket
  • Post Cap

 

Installation DetailsClick to ExpandClick to Contract

 

Installation Video

 

Fixing Details

For Non-Cyclonic Areas

Two 12 x 20mm self drilling screws per pan at each support and two 3.2mm sealed aluminium rivets per pan at the back channel. If decking runs parallel to the back channel, secure to channel with rivets at maximum 200mm centres. All screws require neoprene washers.

For Cyclonic Areas

Three 12 x 20mm self drilling screws per pan at each support. For deck spans less than 3600mm, two self drilling screws per pan are to be used on the fascia beam. Three 4.8mm sealed aluminium rivets per pan (or 150mm centres if sheets are parallel) are to be used on the back channel. All screws require neoprene washers.

 

Roof Sheeting

Outback Deck

The profile of Outback veranda and patio decking

Outback Rooflite

The Outback veranda and patio rooflite

Structural Sections

  • Stratco Outback Veranda 120mm beam

    120mm Beam

  • Stratco Outback Veranda 150mm beam

    150mm Beam

  • Prost and purlin for the Stratco Outback Veranda

    Post | Purlin

  • Back channel for the Stratco Outback Verandah

    Back Channel

 

Design Considerations

Gable units attached between a flat or Sunroof unit and an existing structure

Gable units which are attached between a flat or Sunroof unit (excluding pergolas) and an existing house, are only considered attached if the gable unit is attached to the existing house (C) for its full length (L) and the longest side of the combined unit (B) does not exceed twice the gable unit length (L). The flat or Sunroof unit in this case can be considered attached. This style requires all coloumns to be embedded into footings.

Stratco Outback Gable Verandah Patio or Carport Configuration

The unit is considered attached if:  B = 2 L or less, and C = L

 

Gable units attached to a flat or Sunroof unit on one or both sides

Gable units which are attached on one or both sides to flat or Sunroof units, (excluding pergolas) must be attached to a house for at least 75% of the gable opening length (O) to be considered attached. Flat or Sunroof units must be deemed attached as detailed in the flat or Sunroof unit section below to allow the gable unit to be considered attached.

Gable units are considered attached on both sides if both the flat 1 and 2 comply with the attachment rules for flat or Sunroof units as detailed below. Gable units are considered attached on one side if only one flat or Sunroof unit exists and it complies with the attachment rules for flat or Sunroof units as detailed below.

Stratco Outback Gable Verandah Patio or Carport Configuration

The gable | curved unit is considered attached if:  C = 0.75 of O or more

 

Design Options

When designing an Outback Patio, consideration should be given to both the roof sheet direction, and the orientation of any openings and overhangs involved. These are often determined by appearence and drainage requirements. Some of the normal configurations are shown below. Contact Stratco if assistance is required.

Attached to a wall or fascia on one side only.

Stratco Outback Gable Verandah Patio or Carport Configuration

Attached to a flat or Sunroof unit on one side and a wall or fascia on one end.

Stratco Outback Gable Verandah Patio or Carport Configuration

Attached both sides to the flat or Sunroof unit and the wall or fascia on the opposite side.

Stratco Outback Gable Verandah Patio or Carport Configuration

Attached to the flat or Sunroof unit on both sides and the wall or fascia on one end.

Stratco Outback Gable Verandah Patio or Carport Configuration

Note: When attaching gable patios to Sunroof units, please refer to 'The Rules of Attachment to Standard Outback Systems' in the 'Outback Sunroof Span Tables Book'.

 

Meet Maddy

GIFT CARDS

How to give the gift of Stratco
Give the gift of Stratco

Buy Online

Stratco Outback

Patios

Outback®
Sunroof

Outback Patio Range

How To.

Find the perfect tool for every job.

Browse Hardware