- Contact Us
-
Your location
Pialba QLD 4655
Your nearest store is
Hervey Bay
-
Products
Our products
Click Mania SalePatio & Outdoor Living See all
Louvre Lighting Outdoor BlindsOutdoor KitchensAll Patio & Outdoor LivingGarages, Sheds & Shed Storage See all
Cyclonic Sheds Flat Roof Sheds & Garages Gable Roof Sheds & GaragesIndustrial & Rural ShedsUmbra Awning Sheds All Garages, Sheds & Shed StorageFencing, Gates & Screening See all
All Fencing, Gates & ScreeningGift CardsMining Outdoor KitchensLawn & Garden See all
All Lawn & GardenSale Clearance All Products - Specials
- Stores
-
About
Stratco is one of the largest producers and marketers of quality building and home improvement products in Australia with a network of stores throughout the country.
- Trade
- Specifiers
Round Downpipe
StratcoSKU: Round-Downpipe
The classic Stratco Round Downpipe is available in a diameter to suit any application from industrial to residential buildings. Spouting lengths of 1800mm and 2400mm are available in galvanised, zinc/al or a huge range of roofing colours. Whether you want to install it yourself or require assistance, we are here to help. Contact us for pricing and further details today.Image gallery
Classic Round Downpipe
Downpipe styling designed to adapt to any architecture
Round downpipes have a timeless shape that compliments both modern and traditional architecture. The round profile is largely self cleaning and is available in a huge range of diameters. Complete your project with an extensive range of Stratco Round Downpipe accessories.
Available Colours:
Brochures & Installation Guides
Round Downpipe Accessories
Downpipe straps can be supplied to easily attach the downpipe to the wall of the building. Shoes (135°) and elbows (90°) are available to help water flow to a specific area. Downpipe outlets are an added accessory to help channel water from the gutter to the downpipe.
Note: Component availability is state specific, please check prior to ordering.
Adjustable Two Piece Offset
Downpipe Elbow
Downpipe Shoe
45° and 90° Crimped Bend
17° Cast PVC Offset
45° Cast PVC Offset
90° Cast PVC Offset
Metal Sculptured Outlet
Downpipe Outlet
Downpipe Strap
Pipelock Bracket
Adjustable Tee Bracket
As a general guide, in non cyclonic areas, for every 1m2 of roof area drained, 70mm2 of downpipe is required. This calculation is based on the assumption that the maximum rainfall does not exceed 125mm per hour.
It is considered the best practice to drain to different points, using smaller downpipes rather than to one large outlet. Where possible, downpipes should be spaced at not more than 12000mm centres.
For a more accurate guide, consult the Installation Code for Metal Roofing and Wall Cladding SAA HB39-1997.
Material Specification
BMT - 0.40mm and 0.50mm
Tensile - G300 MPa
| Downpipe Sizes | |
| Diameter (mm) | Roof Area Drained (m²) |
|---|---|
| 50 | 30 |
| 65 | 45 |
| 75 | 65 |
| 90 | 90 |
| 100 | 115 |
| 125 | 170 |
| 150 | 250 |
| 175* | 345 |
| 200* | 450 |
| 225* | 570 |
*1800mm lengths only
More Options
Tell your friends about Stratco
- Share this page
- Google Plus
