has been added to your cart
View Cart

VFC Gutter

SKU: VFCSAZ

$15.37 LM
Temporarily out of stock

Installation options available^

About this product

VFC Gutter has a clean, modern appearance that suits contemporary styles. The square front is designed to hide the end of roofing and provide a neat face to architecture. VFC Guttering is available with water overflow slots.

For trade and project quantity discounts:

Clean and Modern Square Front Gutter

Hide the edge of roofing with a gutter that has crisp, clean lines.

Attractive square front guttering that has been designed to conceal the edge of roof sheets and tiles with a smooth clean gutter face. The front face of the gutter is available with slots to allow excess water to overflow in high rainfall areas.

VFC Gutter is complimented by a large range of accessories including stop ends, gutter mitres and brackets. Choose from an extensive range of pre-painted colours or from un-painted zinc/al.

Available Colours

Gutter Accessories

Gutters-Guttering-Gutter-VFC-Accessory-Mitres.jpg

Internal and External Mitres

Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.

Gutters-Guttering-Gutter-VFC-Accessory-Stop-End.jpg

Stop End

Individual stop ends can be supplied in left and right hand ready for on site installation.

Gutters-Guttering-Gutter-VFC-Accessory-Return-Stop-End.jpg

Return Stop End

Return stop end ready to be installed on site to suit the projects requirements.

Gutters-Guttering-Gutter-VFC-Accessory-Bracket-Strap.jpg

 Internal Str-8-line Strap

Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external face.

Gutters-Guttering-Gutter-VFC-Accessory-Bracket-GP.jpg

GP Bracket

GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters.

Gutters-Guttering-Gutter-VFC-Accessory-Bracket-External.jpg

External Bracket

External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.

Note: Availability is state specific, please check prior to ordering.

Specifications

Specifications
Tensile (MPa) BMT (mm) Type Capacity (mm²) Total Cross Section
Area (mm²)
G300 0.50 Standard 6775 7957
Slotted 5475 6657

Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.


Dimensions

Gutters Guttering Gutter VFC Profile

Gutters-Guttering-Gutter-VFC-Profile-2.png
Dimensions (mm)
A 67
B 119
C 130

 

Roofing_Gutters_VFC_And_VC_Gutter_Locations-01.png

Become a Super Saver

Change Location

Please enter a valid postcode