Smoothline® Gutter


Show state availabilityStates Sold
  • ACT
  • NSW
  • NT
  • QLD
  • SA
  • VIC

Featuring a smooth, attractive profile with a curved front and a flat back, Smoothline Gutter is suited to both modern and traditional homes. Smoothline Gutter has internal brackets for a clean appearance, it is easy to install and maintain.

We can arrange installation

Smooth, Flowing Curves

Adaptable, elegant and practical guttering

Smoothline Gutter features a smooth, curved front with a flat back for stability. The curved profile of Smoothline Gutter is not only attractive, it also reduces the risk of debris build up due to its self cleaning nature.

Available in un-painted zinc/al or in a large range or pre-painted colours, Smoothline Gutter will compliment both modern and traditional homes.

Slots are available in the front of the gutter to allow excess water to overflow. Complete your project with an extensive range of Smoothline Gutter accessories including mitres, stop ends and brackets.

Available Colours:

  • Armour Grey
  • Banyan Brown
  • Birch
  • Caulfield Green
  • Cobblestone
  • Dark Stone
  • Driftwood
  • Ebony
  • Granite
  • Gull Grey
  • Gun Metal Grey
  • Heritage Red
  • Merino
  • Mist Green
  • Moss Vale Sand
  • Mountain Blue
  • Off White
  • Red Dust
  • River Reed
  • Slate Grey
  • Smooth Cream
  • Wild Sage


Tensile (MPa) BMT (mm) Type Capacity (mm²) Total Cross Section
Area (mm²)
G550 0.42 Standard 8748 10124
Slotted 6961 8332

Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.


Smoothline Gutter Profile

  • Smoothline Gutter Profile
  • Dimensions (mm)
    A 51
    B 138
    C 104

Gutter Accessories

  • Stratco Smoothline Gutter Accessory
  • 90° External and Internal Cast Angle

    Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building.

  • Stratco Smoothline Gutter Accessory
  • 90° Two Piece Cast Angle

    Available in NSW only, two piece cast angles provide an easy and flexible solution to gutter mitres. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner.

  • Stratco Smoothline Gutter Accessory
  • Internal and External Mitres

    Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.

  • Stratco Smoothline Gutter Accessory
  • Return Stop End

    Return stop end ready to be installed on site to suit the projects requirements.

  • Stratco Smoothline Gutter Accessory
  • Stop End

    Individual stop ends can be supplied in left and right hand ready for on site installation.

  • Stratco Smoothline Gutter Accessory
  • Internal Str-8-line Strap

    Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external gutter face.

  • Stratco Smoothline Gutter Accessory
  • Timber Fix Clip

    Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building.

Note: Availability is state specific, please check prior to ordering.


Meet Maddy


How to give the gift of Stratco
Give the gift of Stratco

Buy Online

Stratco Outback



Outback Patio Range

How To.

Find the perfect tool for every job.

Browse Hardware